Bent face plate

A place to discuss those classic and vintage fly reels, classics include modern variations of those of vintage. Please add your photos, stories or just join in conversation about your reels.

Moderators: fishnbanjo, Ken M 44

Post Reply
Posts: 53
Joined: 04/13/20 22:48

Bent face plate


Post by Palakona123 »

When playing around with my 3 3/8 perfect a while ago I noticed that the faceplate is slightly bent, and toutches down on one of the pawls.
I am thinking of bending it out by placing it between to blocks of wood, with the necessary holes drilled out, and press it with a screw clamp. Is that a good idea that would work, or should I just send it to somone that knows this better than me?

Posts: 112
Joined: 05/28/13 19:24
Location: North Yorkshire, UK

Re: Bent face plate


Post by Godfroy »

This usually happens when the reel is dropped or bumped on the end of the handle. In straightening it you want to reverse this force. I have done this successfully on a reel (also a 3 3/8 Perfect) that arrived like this from eBay.

In my experience you have to push it a little beyond flat in the opposite direction to the bend for it to set in the correct plane.

Post Reply

Return to “Classic Fly Reels”