Heddon 8' 6" 1 3/4F 3pc taper

The exchange of tapers forum is for classic and personally developed tapers. The definition of classic tapers are those tapers that were developed by rodmakers that are no longer alive. Please understand that rod makers who have developed their tapers, and are active in the community, should not have their tapers cloned, or shared, without their permission, please refrain for asking for those tapers as it infringes on the maker.

Moderator: pvansch1

Post Reply
RAZINGKANE
Guide
Posts: 163
Joined: 01/02/17 19:19
Location: Grayling, MI
Contact:
Contact RAZINGKANE

Heddon 8' 6" 1 3/4F 3pc taper

#1

Post by RAZINGKANE »

Would anyone out there have numbers for this taper? Can't seem to find a good set to work from. Any help would be appreciated. Thanks in advance.

John
Top
SamNielson
Guide
Posts: 171
Joined: 10/22/12 14:52

Re: Heddon 8' 6" 1 3/4F 3pc taper

#2

Post by SamNielson »

Could you send me anything you get for this? I've also asked this question here before and never really got a good set of numbers to work with. I got such a rod, but the tip section was obviously not original. It was longer and finished differently. So I want to make a new tip to fit the original.
Thanks.
Sam Nielson
Top
Post Reply

Return to “Taper Exchange”