Looking for identification of manufacture

This is the board to ask about the identity, or for an appraisal, of a rod. Please use the outline as explained on the board. If there is a makers name, list that in the subject line. Make sure you include the length, number of sections, any identifying markings and the general condition. Adding photographs is always helpful!

Moderator: TheMontyMan

Post Reply
PatrickVegas
Member
Posts: 1
Joined: 04/10/21 13:16

Looking for identification of manufacture

#1

Post by PatrickVegas »

I have an 8 1/2 foot three piece bamboo rod with a second tip. All sections are equal in length. No markings on rod. When purchase it had an Oren o magic model 1140 d mounted on it. I would like to find out a manufacture. It looks low end but all complete. Any ideas?
Image

Image

Image

Image

Image

User avatar
Shrimpman
Bamboo Fanatic
Posts: 1552
Joined: 06/28/14 15:38
Location: Wet Coast of Canada

Re: Looking for identification of manufacture

#2

Post by Shrimpman »

It started out life as a South Bend. It looks likes it is suffering from severe delamination of the strips. Regards,
Shrimpy

Post Reply

Return to “Appraisals & Identification of Bamboo Fly Rods”