Hello All,
I acquired an Orvis Battenkill 8ft, 3pc rod that needs the striping guide wrap repaired or replaced. The rod was manufactured in the 1989-90 time frame.
It looks like the stripping guide got pull loose somehow and the original owner just dabbed some finish on the loosened thread wraps. The guide is still a bit loose and I want to get this repaired so I can take it on a trip out west this summer. I don’t think Orvis will be able to turn it around in time if I send it to them.
Any suggestions on who or where to send the rod for the repair? Although I would like to get the repair done in time for my July trip, I would rather it be done correctly with matching thread even if it takes longer.
Thank you for your help.
Orvis Guide Wrap Repair
Moderator: Titelines
Re: Orvis Guide Wrap Repair
#2Not sure where you are located, but Marty DeSapio or Art Weiler (NJ and PA respectively) will make short work of that, and it will be like new. There are probably many others that will be suggested, but - I have examples of these two craftsmen's work, and can strongly suggest either.
As I mentioned in previous posts, I would send to Orvis, but I understand you are under a time constraint.
Mike B
As I mentioned in previous posts, I would send to Orvis, but I understand you are under a time constraint.
Mike B
Re: Orvis Guide Wrap Repair
#3With Orvis rods being impregnated, they are the easiest guides to repair. Get a spool of 541 from somebody on this forum and do it yourself. It’s quite simple and I’m sure that there are plenty of YouTube videos. If you are a bamboo guy, it would be a good idea to learn this easy process for possible future repairs.
Re: Orvis Guide Wrap Repair
#5Fix it with whatever you have now then have it set right after your trip.
- Greg Reynolds
- Bamboo Fanatic
- Posts: 3092
- Joined: 12/21/04 19:00
- Location: The Laurel Highlands, PA
Re: Orvis Guide Wrap Repair
#7Kathy Jensen sent me this years ago, she won't mind me posting it:
"Hi Greg,
...I'm replacing a couple guides on this one. (dried out wraps on one & one broken guide) I used Gudebrod silk #832, 00 on the old wooden spool, with varnish. Real nice match, just in case someone asks you for suggestions. On some of the older ones I've used the newer Gudebrod silk to get the cranberry color, #541 silk to get the brown, #832 nylon for the lighter tan examples.
Best regards,
Kathy
Kathy Jensen, Business Mgr.
For Michael D. Clark, Rodmaker"
"Hi Greg,
...I'm replacing a couple guides on this one. (dried out wraps on one & one broken guide) I used Gudebrod silk #832, 00 on the old wooden spool, with varnish. Real nice match, just in case someone asks you for suggestions. On some of the older ones I've used the newer Gudebrod silk to get the cranberry color, #541 silk to get the brown, #832 nylon for the lighter tan examples.
Best regards,
Kathy
Kathy Jensen, Business Mgr.
For Michael D. Clark, Rodmaker"
The Orvis Database: http://antiquerodandreels.com/databases/orvisdb