My normal suppliers for nickel silver rod are out of stock on .250 and.281.
I only make a few ferrules a year so I don’t need a huge amount.
I’m looking to buy a few feet of each but need a new source. Any ideas?
Sent from my iPhone using Tapatalk
Source for nickel silver rod
Moderator: Titelines
-
- Guide
- Posts: 222
- Joined: 01/26/12 19:11
- Location: Ashland kentucky
-
- Master Guide
- Posts: 692
- Joined: 07/23/17 18:07
- Location: Missouri Ozarks
Re: Source for nickel silver rod
#2Texas Knife Makers:https://www.texasknife.com/vcom/index.php
Jantz: https://knifemaking.com/products/nickel ... 5ebd&_ss=r
USA Knifemaker: https://usaknifemaker.com/catalogsearch/result/?q=rod
Jantz looks like it is out of .2500 and USA does not appear to have any at all?
Not sure if that helps, but...never know.
Jantz: https://knifemaking.com/products/nickel ... 5ebd&_ss=r
USA Knifemaker: https://usaknifemaker.com/catalogsearch/result/?q=rod
Jantz looks like it is out of .2500 and USA does not appear to have any at all?
Not sure if that helps, but...never know.
-
- Guide
- Posts: 222
- Joined: 01/26/12 19:11
- Location: Ashland kentucky
Re: Source for nickel silver rod
#3Thanks for your quick response. Jantz and online metals have been my suppliers in the past. I’m not sure why everyone seems to have stock issues now.
Jim
Sent from my iPhone using Tapatalk
Jim
Sent from my iPhone using Tapatalk
Re: Source for nickel silver rod
#4I use Online Metals for all ferrule stock. 5/16” (0.312) and 3/8” (0.375) for Nickel Silver, Duronze, and Nickel Aluminum Bronze. They occasionally have smaller but for my process and range of ferrule sizes I usually don’t need it any smaller.
- canerodscom
- Bamboo Fanatic
- Posts: 2861
- Joined: 02/01/04 19:00
Re: Source for nickel silver rod
#5Dave Norling at Rush River Rods usually has all sizes for sale.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk