One-weight taper
Moderator: pvansch1
-
- Master Guide
- Posts: 557
- Joined: 01/08/04 19:00
One-weight taper
#1For giggles I’d like to attempt a one-weight rod, I’ve lost my taper for Tony Spezio’s rod, don’t know of others. Sources?
Re: One-weight taper
#3Here is Tony's post to the Rodmakers email list from 8/1/2011. I'm not sure what a "trenched" ferrule is. Maybe just truncated?
--------------------------------------------------------------------------------------------------------------------------------------------------
I have gotten a number of requests for the 1 wt taper. It can be found on Larry's DNA but I thought I would post it. It is a neat little bluegill rod, I have made 11 of them. Some made on this taper and some with .002 added to the tip section. The rod is 6'3" uses a 9 trenched ferrule, an 8mm stripper and a 3.5 tip top. The reel seat is a .650 X 3 1/2".
Arkansas Tony
Subject: Fw: 1 WT Taper
It can be made on this taper but I like it better with .001 added to the form setting for the tip section. Art Port made one on the taper below. He had it at the 07 Gathering.
Tony
----- Forwarded Message -----
From: Anthony Spezio <bambotony@yahoo.com>
To: bambotony@yahoo.com
Sent: Wednesday, October 14, 2009 8:46 AM
Subject: 1 WT Taper
Here is the 1 wt taper Very mich like the Sir D in a 1 wt
0 .052
5 .053
10 .062
15 .078
20 .095
25 .107
30 .119
35 .136
40 .154
45 .162
50 .168
55 .1890
60 .2020
65 .2240
70 .2240
75 .2240
--------------------------------------------------------------------------------------------------------------------------------------------------
I have gotten a number of requests for the 1 wt taper. It can be found on Larry's DNA but I thought I would post it. It is a neat little bluegill rod, I have made 11 of them. Some made on this taper and some with .002 added to the tip section. The rod is 6'3" uses a 9 trenched ferrule, an 8mm stripper and a 3.5 tip top. The reel seat is a .650 X 3 1/2".
Arkansas Tony
Subject: Fw: 1 WT Taper
It can be made on this taper but I like it better with .001 added to the form setting for the tip section. Art Port made one on the taper below. He had it at the 07 Gathering.
Tony
----- Forwarded Message -----
From: Anthony Spezio <bambotony@yahoo.com>
To: bambotony@yahoo.com
Sent: Wednesday, October 14, 2009 8:46 AM
Subject: 1 WT Taper
Here is the 1 wt taper Very mich like the Sir D in a 1 wt
0 .052
5 .053
10 .062
15 .078
20 .095
25 .107
30 .119
35 .136
40 .154
45 .162
50 .168
55 .1890
60 .2020
65 .2240
70 .2240
75 .2240
"Wherever the fish are, that's where we go."
Richard Wagner
Richard Wagner
Re: One-weight taper
#4Here are a couple others, from Dave LeClair. Posted to the Rodmakers listserv 3/30/2011
-------------------------------------------------------------------------------------------------------------------------------------------------------
Taper for five foot, one weight,
Two Piece (Std. Version)
0- .045
5- .062
10 -.066
15- .078
20- .088
25 -.098
30- .115
35- .118
40- .130
45- .148
50- .188
55- .242
60- .242
Fast taper (Modified Version)
0- .045
5- .063
10- .081
15- .095
20- .107
25- .120
30- .138
35- .157
40- .191
45- .230
50- .258
55- .267
60- .310
-------------------------------------------------------------------------------------------------------------------------------------------------------
Taper for five foot, one weight,
Two Piece (Std. Version)
0- .045
5- .062
10 -.066
15- .078
20- .088
25 -.098
30- .115
35- .118
40- .130
45- .148
50- .188
55- .242
60- .242
Fast taper (Modified Version)
0- .045
5- .063
10- .081
15- .095
20- .107
25- .120
30- .138
35- .157
40- .191
45- .230
50- .258
55- .267
60- .310
"Wherever the fish are, that's where we go."
Richard Wagner
Richard Wagner
-
- Master Guide
- Posts: 557
- Joined: 01/08/04 19:00