JH McGinn

Discuss various makers rods here, i.e. if the maker is not listed under its own forum please feel free to discuss them here vintage or current. I would like to keep the makers listed by an individual read-only forum so it will be easier for those interested in those makers to find specific information about the rods and the makers. If anyone has any original catalogs they could scan and pass along to me I would be pleased to use them to give a history of the maker and their models in a forum, thanks.

Moderators: Ken M 44, fishnbanjo

Post Reply
erics beetle
Member
Posts: 7
Joined: 10/13/14 09:18

JH McGinn

#1

Post by erics beetle »

Picked up this today , seems a nice little 7ft 6 with two tips and seems totally unused , hard to find any info on the maker wondered if anyone can enlighten me
Image

Image

Image

Image

Image
Top
User avatar
SpringCreek
Bamboo Fanatic
Posts: 3211
Joined: 02/24/07 19:00
Location: Wildwood, MO
Contact:
Contact SpringCreek

Re: JH McGinn

#2

Post by SpringCreek »

J.H. McGinn was a maker in Austrailian maker about 40 - 50 years ago. His rods were well regarded and I've seen them most often surface in the UK. Other than that I can't fill in any additional details.

JIm
Then as it was, then again it will be. Though the course may change sometimes, rivers always reach the sea. - Led Zeppelin, 10 Years Gone

http://www.splittingcane.com
Top
Becksandbrowntrout
Member
Posts: 8
Joined: 08/16/20 01:34

Re: JH McGinn

#3

Post by Becksandbrowntrout »

I read somewhere that he had worked for partridge before going to Aussie but that all I could find
Top
Post Reply

Return to “Rod makers history, value guide and general discussion”