History and value of Phillipson Rods

History of the Phillipson Rod Co. Feel free to discuss Phillipson Rods here.

Moderators: Ken M 44, fishnbanjo

Locked
User avatar
fishnbanjo
The Canefather
Posts: 4282
Joined: 03/21/04 19:00

History and value of Phillipson Rods

#1

Post by fishnbanjo »

Bill Phillipson had been a protégé of Goodwin Granger and then supervisor of the rod shop for the Goodwin Granger Co. up until the time it closed down shortly before World War II. In 1945 he tried to purchase the Granger operation but when that failed he started his own company, the Phillipson Rod and Tackle Co., and produced his first catalog of bamboo rods in 1946. Phillipson was an innovator in the truest sense, he was constantly making changes and improvements in his bamboo rods, and later during the 1950's and 60's was one of the pioneers in development of fiberglass rods. Many of the outstanding features of the Granger rods were actually developed during Bill's tenure as production manager; including the Registered series of rods, the elliptical cork grip, that also later appeared on some Phillipson models, and the patented nickel silver internal up locking reel seat.

Bill has often been cussed for the obvious glue lines that appear on all Phillipson rods. The glue lines are the result of the Penacolite glue Phillipson used, rather than any flaw or lack of tolerances in the milling process. Bill always valued function over appearance and refused to use what he felt were inferior glues simply because they dried clear leaving no glue lines. Penacolite was the most water repellent of any glue available, even more so than Resorcinol. The disadvantage was the dark purple color that shows as distinct glue lines between strips of bamboo; similar to, but more distinct than the glue lines evident in most Garrison and Gillum rods.

The most common fly rod models produced by Phillipson include his original series of the Pacemaker, Power Pakt, Paramount and Premium; and the Paragon added a year later. During the later years he introduced a line of impregnated models that included the Preferred and Peerless series. Each of these models was available in a variety of lengths and line weights. Other less common Phillipson models include the Smuggler, a four-piece travel rod produced only during 1952, and the Peerless Dry Fly Special. Other rods produced by Phillipson that never carry the Phillipson name, but were private-label rods for specific sporting goods outlets include the Haywood Zephyr and the Ed M. Hunter Approved.

The Phillipson era ended when Bill sold his company in 1972 to 3M Corporation, and they produced 300 impregnated Peerless rods at the Phillipson plant in Denver before moving the equipment to Minnesota. These rods are distinguishable by the wooden spacers in the aluminum reel seats. The Phillipson Rod has been returned to Denver CO and is now owned by Rick (Richard) Gottdenker and his partner, Marilyn Richter.

Paragon

8 1/2 ' 3-pc., 2 tip 5 oz. $315
9' 3-pc., 2 tip 5-5/8 oz. $250

Pacemaker

8' 3-pc., 2 tip 4 1/4 oz. $475
8 1/2 ' 3-pc., 2 tip 5 oz. $315
8 1/2 ' 3-pc., 2 tip Dry Fly 5 1/2 oz. $325
9' 3-pc., 2 tip 5-5/8 oz. $275
9' 3-pc., 2 tip 6 oz. $260
9 1/2 ' 3-pc., 2 tip 6 1/4 oz. $250

Pow'r Pak't

7' 2-pc., 2 tip 3 oz. $600
7 1/2 ' 2-pc., 2 tip 3 3/4 oz. $550
8' 3-pc., 2 tip 4 1/4 oz. $475
8 1/2 ' 3-pc., 2 tip 5 oz. $325
8 1/2 ' 3-pc., 2 tip Dry Fly 5 1/2 oz. $340
9' 3-pc., 2 tip 5-5/8 oz. $275
9' 3-pc., 2 tip 6 oz. $275
9 1/2 ' 3-pc., 2 tip 6 1/4 oz. $260

Paramount

7' 2-pc., 2 tip 3 oz. $600
7 1/2 ' 2-pc., 2 tip 3 3/4 oz. $550
8' 3-pc., 2 tip 4 1/4 oz. $500
8 1/2 ' 3-pc., 2 tip 5 oz. $350
8 1/2 ' 3-pc., 2 tip Dry Fly 5 1/2 oz. $350
9' 3-pc., 2 tip 5-5/8 oz. $275
9' 3-pc., 2 tip 6 oz. $275
9 1/2 ' 3-pc., 2 tip 6 1/4 oz. $260

Premium

7' 2-pc., 2 tip 3 oz. $625
7 1/2' 2-pc., 2 tip 3 3/4 oz. $575
8' 3-pc., 2 tip 4 1/4 oz. $550
8 1/2 ' 3-pc., 2 tip 5 oz. $375
8 1/2 ' 3-pc., 2 tip Dry Fly 5 1/2 oz. $400
9' 3-pc., 2 tip 5-5/8 oz. $325
9' 3-pc., 2 tip 6 oz. $300
9 1/2 ' 3-pc., 2 tip 6 1/4 oz. $300

Dry Fly Special

8 1/2 ' 3-pc., 2 tip 5 1/2 oz. $475
with extra grip to make 6'2" Midge rod

Smuggler

7'8"' 4-pc., 1 tip 4 3/4 oz. $650

Haywood Zephyr

7' 2-pc., 1 tip 4 oz. $475

Ed M. Hunter, Approved

8 1/2 ' 3-pc., 2 tip 5-5/8 oz. $375

Preferred (Impregnated)

7' 2-pc., 2 tip 3 oz. $625
7 1/2 ' 2-pc., 2 tip 3 3/4 oz. $600
8' 3-pc., 2 tip 4 1/4 oz. $600
8 1/2 ' 3-pc., 2 tip 5 oz. $400
8 1/2 ' 3-pc., 2 tip Dry Fly 5 1/2 oz. $400
9' 3-pc., 2 tip 5-5/8 oz. $300
9' 3-pc., 2 tip 6 oz. $300

Peerless (Impregnated)

7' 2-pc., 2 tip 3 oz. $650
7 1/2 ' 2-pc., 2 tip 3 3/4 oz. $625
8' 3-pc., 2 tip 4 1/4 oz. $600
8 1/2 ' 3-pc., 2 tip 5 oz. $400
8 1/2 ' 3-pc., 2 tip Dry Fly 5 1/2 oz. $400
9' 3-pc., 2 tip 5-5/8 oz. $325
9' 3-pc., 2 tip 6 oz. $300

Colorado Topflyte

8 1/2 ' 3--pc., 2 tip 5 oz. $300
9' 3-pc., 2 tip 5 1/2 oz. $250

Locked

Return to “Phillipson Rod Co. Rods”